案例推理的地学应用背景和方法

案例推理 (CBR)研究 ,是人类认知的一种合理性模型 ,接近于人类认识、解决问题最原始的思维方式 ,具有在无法获取机理模型、确定规则或统计模型时 ,采用简单的历史相似性推理实现问题的定量求解和预测 ,成为人工智能领域近年来的研究热点。     

水下滑翔器主体外形优化设计

对水下滑翔器主体外形的优化设计问题进行研究.首先,在考虑内部机械结构限制的条件下,建立了主体外形优化数学模型,并采用CFX计算了若干主体形状的绕流阻力.在此基础上建立了映射主体外形的尺寸参数与绕流阻力的BP神经网络.然后将建立的神经网络作为优化设计问题的目标函数,采用坐标轮换法对滑翔器主体外形进行了优化设计,确定了尺寸参数的最优解.     

CORROSION AND ADHERENCE AT SEA OIL-PLATFORM

Measurements of the adhesive corrosion and protective potentials of 3 Bohai Sea oilplatforms under different cathodic protection showed corrosion still occurred on these platforms undertheir designed protective potentials. Preliminary conclusions from indoor experiments on the relation betweenadhesive corrosion and cathodic protection showed adhering organisms caused the corrosion onthese platforms.     

基于负反馈的网络负载调度算法

提出一种基于负反馈权值的动态网络负载调度算法。算法主要用在多出口路由器上，其执行效率高，开销小。基于算法的多出口路由器不仅能够很好的保持出口间的负载均衡。还具有良好的出口容错性能。     

基于WS-Security的安全动态电子商务

Web服务方式的动态电子商务是电子商务的最终目标，安全问题是制约动态电子商务实现的主要因素。在介绍了WS-Security规范后，给出了一个建立动态电子商务的案例，分析了这个过程中可能面临的安全风险，提出了一种如何实现电子商务中重要的机密性、完整性问题的方法。     

黄淮海平原地下水开采的水文效应

黄淮海平原是我国地下水开发最早,利用程度最高的地区。随着地下水开采量急剧增长,已产生了一系列水文效应变化,其中包括区域地下水位下降和地下水降落漏斗的形成;开采浅层地下水对地表径流和降雨入渗补给的地下水量的影响,井灌井排在盐碱土的改良作用等。     

Characteristics and planation surface formation environment of the red weathering crust in Hunan,Guangxi, Yunnan,Guizhou and Tibet

The characteristics of red karst weathering crust in the research region can be divided into three subtypes. The first one includes the silicon to aluminum ratio, the composition of the clay minerals, etc., and reflects the weak action of de-silicon and aluminum enrichment. The second one, for example the granularity, shows that the viscous action is strong. The third one, such as the CaCO₃ content and pH value, has regional difference in a large scale, which is consistent with the condition of modern scenery, so it is not important as for the ancient environment.

     

青藏高原及邻近区域的S波三维速度结构

本文收集了WWSSN台网和我国台网中13个地震台站的长周期地震记录,用140条10-90s瑞利波频散曲线和作者提出的Tarantola-Backus面波频散层析成象方法,作了青藏高原及邻区的速度反演,得出该地区岩石层速度结构的三维图象.结果表明,1.在10-110km深度范围内,速度结构出现与大地构造特征相关的分区性,显示出四个构造单元:青藏块体、柴达木-巴颜喀拉-三江块体、塔里木块体和印度块体.2.高原内部,深度为10-70km内速度较低,莫霍界面呈不对称盆形分布,藏北那曲附近地壳厚度超过70km,高原边缘壳厚为45-50km,90-110km为高速异常,表明高原内部存在上地幔盖层.3.高原北部的班公湖断裂和东部的三江断裂系是该区重要的分界线,是岩石层结构存在明显差异的重要接触部位,可能是冈瓦纳古陆与欧亚古陆的缝合带.4.柴达木-巴颜喀拉-三江块体内部速度分布不均匀,地壳厚度由北向南从45km加深到60km;在深度90-110km存在一低速层.5.塔里木地块内速度随深度均匀增加,从地壳到上地幔110km内没有发现低速层.地壳厚度约50km.     

论中国盐溶角砾岩的特征和分类

中国的蒸发岩矿床非常丰富,与蒸发岩在成因上密切相关的盐溶角砾岩极其发育。本文简述了中国盐溶角砾岩的分布,总结了盐溶角砾岩的一般特征,划分出盐溶角砾岩的主要类型,探讨了盐溶角砾岩与盐泉的关系。     

Time scale of an early to mid-Paleozoic orogenic cycle of the long-lived Central Asian Orogenic Belt, Inner Mongolia of China: Implications for continental growth

We present a detailed, new time scale for an orogenic cycle (oceanic accretion–subduction–collision) that provides significant insights into Paleozoic continental growth processes in the southeastern segment of the long-lived Central Asian Orogenic Belt (CAOB). The most prominent tectonic feature in Inner Mongolia is the association of paired orogens. A southern orogen forms a typical arc-trench complex, in which a supra-subduction zone ophiolite records successive phases during its life cycle: birth (ca. 497–477 Ma), when the ocean floor of the ophiolite was formed; (2) youth (ca. 473–470 Ma), characterized by mantle wedge magmatism; (3) shortly after maturity (ca. 461–450 Ma), high-Mg adakite and adakite were produced by slab melting and subsequent interaction of the melt with the mantle wedge; (4) death, caused by subduction of a ridge crest (ca. 451–434 Ma) and by ridge collision with the ophiolite (ca. 428–423 Ma). The evolution of the magmatic arc exhibits three major coherent phases: arc volcanism (ca. 488–444 Ma); adakite plutonism (ca. 448–438 Ma) and collision (ca. 419–415 Ma) of the arc with a passive continental margin. The northern orogen, a product of ridge-trench interaction, evolved progressively from coeval generation of near-trench plutons (ca. 498–461 Ma) and juvenile arc crust (ca. 484–469 Ma), to ridge subduction (ca. 440–434 Ma), microcontinent accretion (ca. 430–420 Ma), and finally to forearc formation. The paired orogens followed a consistent progression from ocean floor subduction/arc formation (ca. 500–438 Ma), ridge subduction (ca. 451–434 Ma) to microcontinent accretion/collision (ca. 430–415 Ma); ridge subduction records the turning point that transformed oceanic lithosphere into continental crust. The recognition of this orogenic cycle followed by Permian–early Triassic terminal collision of the CAOB provides compelling evidence for episodic continental growth.